Precision billet RC Products...."built to last"!! .Tweak plate, setup plate, droop plate and more! |
 |
|||||||||||
|
|
|
 |
|||||||||
|
|
||||||
|
|||||||
|
|||||||
|
All PPD products come with a 30 day total satisfaction guarantee!
Plus 6 months material and workmanship free replacement on RC parts!
Associated TC5 2.0mm and 2.5mm setup plate is here!!!
Quickly check and remove tweak from shifts caused by collision, wear, and twist that can occur from assembly. Accurately set droop with fine adjustments that are easily duplicated to other drivers or run to run, bench test car safely, work on both sides of car more easily, store chassis safely with no load on suspension and chassis dead flat, FAST and precise quick clamp system that loads or unloads in under 1 minute!!....many more uses!
Plate flatness is guaranteed within .003 (.076mm) over 14.00 inches!!
We will be running a limited supply of tweak / droop plates precision designed for quick setup, accuracy, ease of use all with top quality hardware from aerospace standard materials. All this for less then the cost of a high end LiPo!!
Shipping US $10.50 (weight 4 lbs.) 2-3 day priority w tracking.
Shipping International $39.80 Express with insurance and tracking.
Shipping costs can include up to 4 EZ LiPo items at same cost.
$87.50 ---Sold Out
10-16-08 Update--We will take orders on these via email. When we reach Qty. of 5 ordered we will make another small run. At the time we order material we will ask for 50% deposit that is guaranteed 2 week max ship time. Thank You for the support. Kevin Patterson--PPD
|
|
||||||
|
|||||||
|
|||||||
$14.50 Clamp and Screw Kit
(Plate comes with 1 complete set)
|
|
||||||
|
|||||||
|
|||||||
Quick remove clamp system--no holes to drill, 14 4mm mount holes to choose from- loads under 1 minute!
Accurately check rear droop- quick visual adjustments can be made.
Accurately check front droop- quick visual adjustments can be made.
Stores chassis dead flat when not in use, no load on suspension while in travel bag.